Dense-Medium Fine Coal Washing Plant
ACAN can manufacture Heavy Media Cyclone Plants with a minimum capacity of 25 TPH to the customer defined capacities which can wash + 0,5 mm -20 mm coal. The Heavy Media Cyclone Plants, engineered and designed by ACAN, might be installed as semi-mobile and stationary. Dense media washing, as the latest available washing technology, provides the most efficient results available. ACAN can construct a complete fine coal concentrating plant from input hoppers to output conveyors including all classification, separation and dewatering/drying applications and also manufactures separate concentrating modules.
Technical Features:
- Separates + 0,5 mm -20 mm materials
With 2 products concentrating cyclone:
- Clean coal and discharge can be obtained.
Cyclones can be made of Ni-Hard 4 high resistant cast or ceramic lined (Alumina 47).
General Features:
- Efficient separation
- Efficient control for separation cut point.
- High capacity processing
- Efficient water recirculation
- Minimum magnetite loss
Coal grain size (mm) |
Unit capacity (t/h) |
+0,5 -20
+0,5 -20 |
25
50 |
Dense-Medium Large Coal Washing Plant
Drum Heavy Media Plant is a dense media system used in washing process of +18 mm -150mm coal. ACAN can manufacture Drum Heavy Media Plants with a minimum capacity of 25 TPH to the customer required capacities. Feeding grain thickness might be changed whenever required, without any performance loss during washing of +18 mm –150 mm. Coarse coal concentrating plant is produced as semi-mobile especially in low capacities. ACAN can construct a complete Drum Heavy Media Plant from input hoppers to output conveyors including all classification, separation and dewatering / drying applications and also manufactures separate concentrating modules.
Technical Features:
- Separates + 18 mm – 150 mm materials
Drum Separator:
- Two / three products may be obtained as clean coal, middling’s and discharge depending on the separator type.
General Features:
- Minimum magnetite loss
- High capacity processing
- Durable design and abrasion resistant body
Coal grain size (mm) |
Unit capacity (t/h) |
+18-50
+18-100
+18-150
+18-150 |
25
25
50
100 |